EU dual-use list

• 0 Nuclear materials, facilities and equipment
• 0A Systems, equipment and components
• 0A001 "Nuclear reactors" and specially designed or prepared equipment and components therefor, as follows:
• 0B Test, inspection and production equipment
• 0B001 Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and…
• 0B002 Specially designed or prepared auxiliary systems, equipment and components as follows, for isotope separation plant specified in 0B001, made of or protected by…
• 0B003 Plant for the conversion of uranium and equipment specially designed or prepared therefor, as follows:
• 0B004 Plant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components…
• 0B005 Plant specially designed for the fabrication of "nuclear reactor" fuel elements and specially designed or prepared equipment therefor.
• 0B006 Plant for the reprocessing of irradiated "nuclear reactor" fuel elements, and specially designed or prepared equipment and components therefor.
• 0B007 Plant for the conversion of plutonium and equipment specially designed or prepared therefor, as follows:
• 0C Materials
• 0C001 "Natural uranium" or "depleted uranium" or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more…
• 0C002 "Special fissile materials"
• 0C003 Deuterium, heavy water (deuterium oxide) and other compounds of deuterium, and mixtures and solutions containing deuterium, in which the isotopic ratio of…
• 0C004 Graphite having a purity level better than 5 parts per million 'boron equivalent' and with a density greater than 1,50 g/cm3 for use in a "nuclear reactor", in…
• 0C005 Specially prepared compounds or powders for the manufacture of gaseous diffusion barriers, resistant to corrosion by UF6 (e.g. nickel or alloys containing 60 %…
• 0D Software
• 0D001 "Software" specially designed or modified for the "development", "production" or "use" of goods specified in this Category.
• 0E Technology
• 0E001 "Technology" according to the Nuclear Technology Note for the "development", "production" or "use" of goods specified in this Category.
• 1 Special materials and related equipment
• 1A Systems, equipment and components
• 1A001 Components made from fluorinated compounds, as follows:
• 1A002 "Composite" structures or laminates, as follows:
• 1A003 Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
• 1A004 Protective and detection equipment and components not specially designed for military use, as follows:
• 1A005 Body armour and components therefor, as follows:
• 1A006 Equipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and…
• 1A007 Equipment and devices, specially designed to initiate charges and devices containing "energetic materials", by electrical means, as follows:
• 1A008 Charges, devices and components, as follows:
• 1A102 Resaturated pyrolised carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
• 1A202 Composite structures, other than those specified in 1A002, in the form of thin-walled tubes and having all of the following characteristics:
• 1A225 Wet-proofed platinised catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the…
• 1A226 Specialised packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:
• 1A227 High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:
• 1B Test, inspection and production equipment
• 1B001 Equipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed…
• 1B002 Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
• 1B003 Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture…
• 1B101 Equipment, other than that specified in 1B001, for the "production" of structural composites as follows; and specially designed components and accessories…
• 1B102 Metal powder "production equipment", other than that specified in 1B002, and components as follows:
• 1B115 Equipment, other than that specified in 1B002 or 1B102, for the production of propellant and propellant constituents, as follows, and specially designed…
• 1B116 Specially designed nozzles for producing pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in…
• 1B117 Batch mixers having all of the following, and specially designed components therefor:
• 1B118 Continuous mixers having all of the following, and specially designed components therefor:
• 1B119 Fluid energy mills usable for grinding or milling substances specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls, and specially designed…
• 1B201 Filament winding machines, other than those specified in 1B001 or 1B101, and related equipment, as follows:
• 1B225 Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour.
• 1B226 Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or…
• 1B228 Hydrogen-cryogenic distillation columns having all of the following characteristics:
• 1B230 Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having all of the following…
• 1B231 Tritium facilities or plants, and equipment therefor, as follows:
• 1B232 Turboexpanders or turboexpander-compressor sets having both of the following characteristics:
• 1B233 Lithium isotope separation facilities or plants, and systems and equipment therefor, as follows:
• 1B234 High explosive containment vessels, chambers, containers and other similar containment devices designed for the testing of high explosives or explosive devices…
• 1B235 Target assemblies and components for the production of tritium as follows:
• 1C Materials
• 1C001 Materials specially designed for absorbing electromagnetic radiation, or intrinsically conductive polymers, as follows:
• 1C002 Metal alloys, metal alloy powder and alloyed materials, as follows:
• 1C003 Magnetic metals, of all types and of whatever form, having any of the following:
• 1C004 Uranium titanium alloys or tungsten alloys with a "matrix" based on iron, nickel or copper, having all of the following:
• 1C005 "Superconductive" "composite" conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows:
• 1C006 Fluids and lubricating materials, as follows:
• 1C007 Ceramic powders, ceramic-"matrix" "composite" materials and 'precursor materials', as follows:
• 1C008 Non-fluorinated polymeric substances as follows:
• 1C009 Unprocessed fluorinated compounds as follows:
• 1C010 "Fibrous or filamentary materials", as follows:
• 1C011 Metals and compounds, as follows:
• 1C012 Materials as follows:
• 1C101 Materials and devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, other than those specified…
• 1C102 Resaturated pyrolised carbon-carbon materials designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
• 1C107 Graphite and ceramic materials, other than those specified in 1C007, as follows:
• 1C111 Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
• 1C116 Maraging steels, useable in 'missiles', having all of the following:
• 1C117 Materials for the fabrication of 'missiles' components as follows:
• 1C118 Titanium-stabilised duplex stainless steel (Ti-DSS) having all of the following:
• 1C202 Alloys, other than those specified in 1C002.b.3. or .b.4., as follows:
• 1C210 'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., .b. or .e., as follows:
• 1C216 Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1 950 MPa or more, at 293 K (20 °C).
• 1C227 Calcium having both of the following characteristics:
• 1C228 Magnesium having both of the following characteristics:
• 1C229 Bismuth having both of the following characteristics:
• 1C230 Beryllium metal, alloys containing more than 50 % beryllium by weight, beryllium compounds, manufactures thereof, and waste or scrap of any of the foregoing…
• 1C231 Hafnium metal, alloys containing more than 60 % hafnium by weight, hafnium compounds containing more than 60 % hafnium by weight, manufactures thereof, and…
• 1C232 Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing.
• 1C233 Lithium enriched in the lithium-6 (6Li) isotope to greater than its natural isotopic abundance, and products or devices containing enriched lithium, as…
• 1C234 Zirconium with a hafnium content of less than 1 part hafnium to 500 parts zirconium by weight, as follows: metal, alloys containing more than 50 % zirconium by…
• 1C235 Tritium, tritium compounds, mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1 000 , and products or devices…
• 1C236 'Radionuclides' appropriate for making neutron sources based on alpha-n reaction, other than those specified in 0C001 and 1C012.a., in the following forms:
• 1C237 Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of…
• 1C238 Chlorine trifluoride (ClF3).
• 1C239 High explosives, other than those specified in the Military Goods Controls, or substances or mixtures containing more than 2 % by weight thereof, with a…
• 1C240 Nickel powder and porous nickel metal, other than those specified in 0C005, as follows:
• 1C241 Rhenium, and alloys containing 90 % by weight or more rhenium; and alloys of rhenium and tungsten containing 90 % by weight or more of any combination of…
• 1C350 Chemicals, which may be used as precursors for toxic chemical agents, as follows, and "chemical mixtures" containing one or more thereof:
• 1C351 Human and animal pathogens and "toxins", as follows:
• 1C353 'Genetic elements' and 'genetically-modified organisms', as follows:
• 1C354 Plant pathogens, as follows:
• 1C450 Toxic chemicals and toxic chemical precursors, as follows, and "chemical mixtures" containing one or more thereof:
• 1C513 'High-entropy alloy' or ‘refractory metal and alloy’ powders, not specified in 1C002, having a surface modified with 'inoculants'.
• 1D Software
• 1D001 "Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 1B001 to 1B003.
• 1D002 "Software" for the "development" of organic "matrix", metal "matrix" or carbon "matrix" laminates or "composites".
• 1D003 "Software" specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d.
• 1D101 "Software" specially designed or modified for the operation or maintenance of goods specified in 1B101, 1B102, 1B115, 1B117, 1B118 or 1B119.
• 1D103 "Software" specially designed for analysis of reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures.
• 1D201 "Software" specially designed for the "use" of goods specified in 1B201.
• 1E Technology
• 1E001 "Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 1A002 to 1A005, 1A006.b…
• 1E002 Other "technology" as follows:
• 1E101 "Technology" according to the General Technology Note for the "use" of goods specified in 1A102, 1B001, 1B101, 1B102, 1B115 to 1B119, 1C001, 1C101, 1C107…
• 1E102 "Technology" according to the General Technology Note for the "development" of "software" specified in 1D001, 1D101 or 1D103.
• 1E103 "Technology" for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves, when used for the "production" of "composites" or…
• 1E104 "Technology" for the "production" of pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the…
• 1E201 "Technology" according to the General Technology Note for the "use" of goods specified in 1A002, 1A007, 1A202, 1A225 to 1A227, 1B201, 1B225 to 1B235…
• 1E202 "Technology" according to the General Technology Note for the "development" or "production" of goods specified in 1A007, 1A202 or 1A225 to 1A227.
• 1E203 "Technology" according to the General Technology Note for the "development" of "software" specified in 1D201.
• 2 Materials processing
• 2A Systems, equipment and components
• 2A001 Anti-friction bearings, bearing systems and components, as follows:
• 2A101 Radial ball bearings, other than those specified in 2A001, having all tolerances specified in accordance with ISO 492 Tolerance Class 2 (or ANSI/ABMA Std 20…
• 2A225 Crucibles made of materials resistant to liquid actinide metals, as follows:
• 2A226 Valves having all of the following characteristics:
• 2B Test, inspection and production equipment
• 2B001 Machine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical…
• 2B002 Numerically controlled optical finishing machine tools equipped for selective material removal to produce non-spherical optical surfaces having all of the…
• 2B003 "Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and…
• 2B004 Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:
• 2B005 Equipment specially designed for the deposition, processing and in-process control of inorganic overlays, coatings and surface modifications, as follows, for…
• 2B006 Dimensional inspection or measuring systems, equipment, position feedback units and "electronic assemblies", as follows:
• 2B007 "Robots" having any of the following characteristics and specially designed controllers and "end-effectors" therefor:
• 2B008 'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
• 2B009 Spin-forming machines and flow-forming machines, which, according to the manufacturer's technical specification, can be equipped with "numerical control" units…
• 2B104 "Isostatic presses", other than those specified in 2B004, having all of the following:
• 2B105 Chemical vapour deposition (CVD) furnaces, other than those specified in 2B005.a., designed or modified for the densification of carbon-carbon composites.
• 2B109 Flow-forming machines, other than those specified in 2B009, usable in the "production" of propulsion components and equipment (e.g. motor cases and…
• 2B116 Vibration test systems, equipment and components therefor, as follows:
• 2B117 Equipment and process controls, other than those specified in 2B004, 2B005.a., 2B104 or 2B105, designed or modified for densification and pyrolysis of…
• 2B119 Balancing machines and related equipment, as follows:
• 2B120 Motion simulators or rate tables having all of the following characteristics:
• 2B121 Positioning tables (equipment capable of precise rotary positioning in any axes), other than those specified in 2B120, having all of the following…
• 2B122 Centrifuges capable of imparting accelerations greater than 100 g and designed or modified to incorporate slip rings or integrated non-contact devices capable…
• 2B201 Machine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which…
• 2B204 "Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:
• 2B206 Dimensional inspection machines, instruments or systems, other than those specified in 2B006, as follows:
• 2B207 "Robots", "end-effectors" and control units, other than those specified in 2B007, as follows:
• 2B209 Flow forming machines, spin forming machines capable of flow forming functions, other than those specified in 2B009 or 2B109, and mandrels, as follows:
• 2B219 Centrifugal multiplane balancing machines, fixed or portable, horizontal or vertical, as follows:
• 2B225 Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, having either of the following…
• 2B226 Controlled atmosphere (vacuum or inert gas) induction furnaces, other than those specified in 9B001 and 3B001, and power supplies therefor, as follows:
• 2B227 Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
• 2B228 Rotor fabrication or assembly equipment, rotor straightening equipment, bellows-forming mandrels and dies, as follows:
• 2B230 All types of 'pressure transducers' capable of measuring absolute pressures and having all of the following:
• 2B231 Vacuum pumps having all of the following characteristics:
• 2B232 High-velocity gun systems (propellant, gas, coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to…
• 2B233 Bellows-sealed scroll-type compressors and bellows-sealed scroll-type vacuum pumps having all of the following:
• 2B350 Chemical manufacturing facilities, equipment and components, as follows:
• 2B351 Toxic gas monitors and monitoring systems and their dedicated detecting components, other than those specified in 1A004, as follows; and detectors; sensor…
• 2B352 Biological manufacturing and handling equipment, as follows:
• 2B510 Additive manufacturing equipment, designed to produce metal or metal alloy components, having all of the following, and specially designed components therefor:
• 2D Software
• 2D001 "Software", other than that specified in 2D002, as follows:
• 2D002 "Software" for electronic devices, even when residing in an electronic device or system, enabling such devices or systems to function as a "numerical control"…
• 2D003 "Software", designed or modified for the operation of equipment specified in 2B002, that converts optical design, workpiece measurements and material removal…
• 2D101 "Software" specially designed or modified for the "use" of equipment specified in 2B104, 2B105, 2B109, 2B116, 2B117 or 2B119 to 2B122.
• 2D201 "Software" specially designed for the "use" of equipment specified in 2B204, 2B206, 2B207, 2B209, 2B219 or 2B227.
• 2D202 "Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 2B201.
• 2D351 "Software", other than that specified in 1D003, specially designed for "use" of equipment specified in 2B351.
• 2D352 "Software" specially designed for nucleic acid assemblers and synthesisers specified in 2B352.i., that is capable of designing and building functional genetic…
• 2E Technology
• 2E001 "Technology" according to the General Technology Note for the "development" of equipment or "software" specified in 2A, 2B or 2D.
• 2E002 "Technology" according to the General Technology Note for the "production" of equipment specified in 2A or 2B.
• 2E003 Other "technology", as follows:
• 2E101 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2B004, 2B009, 2B104, 2B109, 2B116, 2B119 to 2B122…
• 2E201 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2A225, 2A226, 2B001, 2B006, 2B007.b., 2B007.c…
• 2E301 "Technology" according to the General Technology Note for the "use" of goods specified in 2B350 to 2B352.
• 2E503 "technology", as follows:
• 3 Electronics
• 3A Systems, equipment and components
• 3A001 Electronic items as follows:
• 3A002 General purpose "electronic assemblies", modules and equipment, as follows:
• 3A003 Spray cooling thermal management systems employing closed loop fluid handling and reconditioning equipment in a sealed enclosure where a dielectric fluid is…
• 3A101 Electronic equipment, devices and components, other than those specified in 3A001, as follows:
• 3A102 'Thermal batteries' designed or modified for 'missiles'.
• 3A201 Electronic components, other than those specified in 3A001, as follows;
• 3A225 Frequency changers or generators, other than those specified in 0B001.b.13., usable as a variable or fixed frequency motor drive, having all of the following…
• 3A226 High-power direct current power supplies, other than those specified in 0B001.j.6., having both of the following characteristics:
• 3A227 High-voltage direct current power supplies, other than those specified in 0B001.j.5., having both of the following characteristics:
• 3A228 Switching devices, as follows:
• 3A229 High-current pulse generators as follows:
• 3A230 High-speed pulse generators, and 'pulse heads' therefor, having both of the following characteristics:
• 3A231 Neutron generator systems, including tubes, having both of the following characteristics:
• 3A232 Multipoint initiation systems, other than those specified in 1A007, as follows:
• 3A233 Mass spectrometers, other than those specified in 0B002.g., capable of measuring ions of 230 u or greater and having a resolution of better than 2 parts in…
• 3A234 Striplines to provide low inductance path to detonators with the following characteristics:
• 3A501 Electronic items as follows:
• 3A502 General purpose "electronic assemblies", modules and equipment, as follows:
• 3A504 Cryogenic cooling systems and components, as follows:
• 3B Test, inspection and production equipment
• 3B001 Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
• 3B002 Test equipment specially designed for testing finished or unfinished semiconductor devices as follows and specially designed components and accessories…
• 3B501 Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
• 3B503 Scanning Electron Microscope (SEM) equipment designed for imaging semiconductor devices or integrated circuits, having all of the following:
• 3B504 Cryogenic wafer probing equipment, having all of the following:
• 3C Materials
• 3C001 Hetero-epitaxial materials, not specified in 3C507, consisting of a "substrate" having stacked epitaxially grown multiple layers of any of the following:
• 3C002 Resist materials as follows and "substrates" coated with the following resists:
• 3C003 Organo-inorganic compounds as follows:
• 3C004 Hydrides of phosphorus, arsenic or antimony, having a purity greater (better) than 99,999 %, even diluted in inert gases or hydrogen.
• 3C005 High resistivity materials as follows:
• 3C006 Materials, not specified in 3C001, consisting of a "substrate" specified in 3C005 with at least one epitaxial layer of silicon carbide (SiC), gallium nitride…
• 3C507 Epitaxial materials consisting of a "substrate" having at least one epitaxially grown layer of any of the following:
• 3C508 Fluorides, hydrides, or chlorides, of silicon or germanium, containing any of the following:
• 3C509 Silicon, silicon oxides, germanium or germanium oxides, containing any of the following:
• 3D Software
• 3D001 "Software" specially designed for the "development" or "production" of equipment specified in 3A001.b. to 3A002.h., 3A501.b.13. or 3B.
• 3D002 "Software" specially designed for the "use" of equipment specified in 3B001.a. to 3B001.f., 3B002, 3A225, 3B501.a.4., 3B501.f.1., 3B501.k. or 3B501.n.
• 3D003 'Computational lithography' "software" specially designed for the "development" of patterns on EUV-lithography masks or reticles.
• 3D004 "Software" specially designed for the "development" of equipment specified in 3A003.
• 3D005 "Software" specially designed to restore normal operation of a microcomputer, "microprocessor microcircuit" or "microcomputer microcircuit" within 1 ms after…
• 3D006 'Electronic Computer-Aided Design' ('ECAD') "software" specially designed for the "development" of integrated circuits having any "Gate-All-Around Field-Effect…
• 3D101 "Software" specially designed or modified for the "use" of equipment specified in 3A101.b.
• 3D225 "Software" specially designed to enhance or release the performance of frequency changers or generators to meet the characteristics of 3A225.
• 3D507 "Software" designed to extract 'GDSII' or equivalent standard layout data and perform layer-to-layer alignment from Scanning Electron Microscope (SEM) images…
• 3E Technology
• 3E001 "Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 3A, 3B or 3C.
• 3E002 "Technology" according to the General Technology Note, other than that specified in 3E001, for the "development" or "production" of a "microprocessor…
• 3E003 Other "technology" for the "development" or "production" of the following:
• 3E004 "Technology" "required" for the slicing, grinding and polishing of 300 mm diameter silicon wafers to achieve a 'Site Front least sQuares Range' ('SFQR') less…
• 3E101 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 3A001.a.1. or 2., 3A101, 3A102 or 3D101.
• 3E102 "Technology" according to the General Technology Note for the "development" of "software" specified in 3D101.
• 3E201 "Technology" according to the General Technology Note for the "use" of equipment specified in 3A001.e.2., 3A001.e.3., 3A001.g., 3A201, 3A225 to 3A234.
• 3E225 "Technology", in the form of codes or keys, to enhance or release the performance of frequency changers or generators to meet the characteristics of 3A225.
• 3E505 "Technology" according to the General Technology Note for the "development" or "production" of integrated circuits or devices, using "Gate-All-Around…
• 4 Computers
• 4A Systems, equipment and components
• 4A001 Electronic computers and related equipment, having any of the following and "electronic assemblies" and specially designed components therefor:
• 4A003 "Digital computers", "electronic assemblies", and related equipment therefor, as follows and specially designed components therefor:
• 4A004 Computers as follows and specially designed related equipment, "electronic assemblies" and components therefor:
• 4A005 Systems, equipment, and components therefor, specially designed or modified for the generation, command and control, or delivery of "intrusion software".
• 4A101 Analogue computers, "digital computers" or digital differential analysers, other than those specified in 4A001.a.1., which are ruggedized and designed or…
• 4A102 Hybrid computers specially designed for modelling, simulation or design integration of space launch vehicles specified in 9A004 or sounding rockets specified…
• 4A506 Quantum computers and related "electronic assemblies" and components therefor, as follows:
• 4A507 Computers, "electronic assemblies", and components containing one or more integrated circuits, specified by 3A501.a.16.
• 4D Software
• 4D001 "Software" as follows:
• 4D002 Not used.
• 4D003 Not used.
• 4D004 "Software" specially designed or modified for the generation, command and control, or delivery of "intrusion software".
• 4E Technology
• 4E001 "Technology" as follows:
• 5 Telecommunications and information security
• 5A Systems, equipment and components
• 5A001 Telecommunications systems, equipment, components and accessories as follows:
• 5A002 "Information security" systems, equipment and components, as follows:
• 5A003 Systems, equipment and components, for non-cryptographic "information security", as follows:
• 5A004 Systems, equipment and components for defeating, weakening or bypassing "information security", as follows:
• 5A101 Telemetry and telecontrol equipment, including ground equipment, designed or modified for 'missiles'.
• 5B Test, inspection and production equipment
• 5B001 Telecommunications test, inspection and production equipment, components and accessories, as follows:
• 5B002 "Information security" test, inspection and "production" equipment, as follows:
• 5D Software
• 5D001 "Software" as follows:
• 5D002 "Software" as follows:
• 5D101 "Software" specially designed or modified for the "use" of equipment specified in 5A101.
• 5E Technology
• 5E001 "Technology" as follows:
• 5E002 "Technology" as follows:
• 5E101 "Technology" according to the General Technology Note for the "development", "production" or "use" of equipment specified in 5A101.
• 6 Sensors and lasers
• 6A Systems, equipment and components
• 6A001 Acoustic systems, equipment and components, as follows:
• 6A002 Optical sensors or equipment and components therefor, as follows:
• 6A003 Cameras, systems or equipment, and components therefor, as follows:
• 6A004 Optical equipment and components, as follows:
• 6A005 "Lasers", other than those specified in 0B001.g.5. or 0B001.h.6., components and optical equipment, as follows:
• 6A006 "Magnetometers", "magnetic gradiometers", "intrinsic magnetic gradiometers", underwater electric field sensors, "compensation systems", and specially designed…
• 6A007 Gravity meters (gravimeters) and gravity gradiometers, as follows:
• 6A008 Radar systems, equipment and assemblies, having any of the following, and specially designed components therefor:
• 6A102 Radiation hardened 'detectors', other than those specified in 6A002, specially designed or modified for protecting against nuclear effects (e.g…
• 6A107 Gravity meters (gravimeters) and components for gravity meters and gravity gradiometers, as follows:
• 6A108 Radar systems, tracking systems and radomes, other than those specified in entry 6A008, as follows:
• 6A202 Photomultiplier tubes having both of the following characteristics:
• 6A203 Cameras and components, other than those specified in 6A003, as follows:
• 6A205 "Lasers", "laser" amplifiers and oscillators, other than those specified in 0B001.g.5., 0B001.h.6. and 6A005, as follows:
• 6A225 Velocity interferometers for measuring velocities exceeding 1 km/s during time intervals of less than 10 microseconds.
• 6A226 Pressure sensors, as follows:
• 6B Test, inspection and production equipment
• 6B002 Masks and reticles, specially designed for optical sensors specified in 6A002.a.1.b. or 6A002.a.1.d.
• 6B004 Optical equipment as follows:
• 6B007 Equipment to produce, align and calibrate land-based gravity meters with a static "accuracy" of less (better) than 0,1 mGal.
• 6B008 Pulse radar cross-section measurement systems having transmit pulse widths of 100 ns or less, and specially designed components therefor.
• 6B108 Systems, other than those specified in 6B008, specially designed for radar cross section measurement usable for 'missiles' and their subsystems.
• 6C Materials
• 6C002 Optical sensor materials as follows:
• 6C004 Optical materials as follows:
• 6C005 "Laser" materials as follows:
• 6D Software
• 6D001 "Software" specially designed for the "development" or "production" of equipment specified in 6A004, 6A005, 6A008 or 6B008.
• 6D002 "Software" specially designed for the "use" of equipment specified in 6A002.b., 6A008 or 6B008.
• 6D003 Other "software" as follows:
• 6D102 "Software" specially designed or modified for the "use" of goods specified in 6A108.
• 6D103 "Software" which processes post-flight, recorded data, enabling determination of vehicle position throughout its flight path, specially designed or modified…
• 6D203 "Software" specially designed to enhance or release the performance of cameras or imaging devices to meet the characteristics of 6A203.a. to 6A203.c.
• 6E Technology
• 6E001 "Technology" according to the General Technology Note for the "development" of equipment, materials or "software" specified in 6A, 6B, 6C or 6D.
• 6E002 "Technology" according to the General Technology Note for the "production" of equipment or materials specified in 6A, 6B or 6C.
• 6E003 Other "technology" as follows:
• 6E101 "Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 6A002, 6A007.b. and .c., 6A008, 6A102, 6A107…
• 6E201 "Technology" according to the General Technology Note for the "use" of equipment specified in 6A003, 6A005.a.2., 6A005.b.2., 6A005.b.3., 6A005.b.4…
• 6E203 "Technology", in the form of codes or keys, to enhance or release the performance of cameras or imaging devices to meet the characteristics of 6A203.a. to…
• 7 Navigation and avionics
• 7A Systems, equipment and components
• 7A001 Accelerometers as follows and specially designed components therefor:
• 7A002 Gyros or angular rate sensors, having any of the following and specially designed components therefor:
• 7A003 'Inertial measurement equipment or systems', having any of the following:
• 7A004 'Star trackers' and components therefor, as follows:
• 7A005 "Satellite navigation system" receiving equipment having any of the following and specially designed components therefor:
• 7A006 Airborne altimeters operating at frequencies other than 4,2 to 4,4 GHz inclusive and having any of the following:
• 7A008 Underwater sonar navigation systems using doppler velocity or correlation velocity logs integrated with a heading source and having a positioning "accuracy" of…
• 7A101 Linear accelerometers, other than those specified in 7A001, designed for use in inertial navigation systems or in guidance systems of all types, usable in…
• 7A102 All types of gyros, other than those specified in 7A002, usable in 'missiles', with a rated "drift rate" 'stability' of less than 0,5° (1 sigma or rms) per…
• 7A103 Instrumentation, navigation equipment and systems, other than those specified in 7A003, as follows; and specially designed components therefor:
• 7A104 Gyro-astro compasses and other devices, other than those specified in 7A004, which derive position or orientation by means of automatically tracking celestial…
• 7A105 Receiving equipment for navigation satellite systems, other than those specified in 7A005, having any of the following characteristics, and specially designed…
• 7A106 Altimeters, other than those specified in 7A006, of radar or laser radar type, designed or modified for use in space launch vehicles specified in 9A004 or…
• 7A115 Passive sensors for determining bearing to specific electromagnetic source (direction finding equipment) or terrain characteristics, designed or modified for…
• 7A116 Flight control systems and servo valves, as follows; designed or modified for use in space launch vehicles specified in 9A004, sounding rockets specified in…
• 7A117 "Guidance sets", usable in "missiles" capable of achieving system accuracy of 3,33 % or less of the range (e.g., a 'CEP' of 10 km or less at a range of 300 km).
• 7B Test, inspection and production equipment
• 7B001 Test, calibration or alignment equipment, specially designed for equipment specified in 7A.
• 7B002 Equipment specially designed to characterize mirrors for ring "laser" gyros, as follows:
• 7B003 Equipment specially designed for the "production" of equipment specified in 7A.
• 7B102 Reflectometers specially designed to characterise mirrors, for "laser" gyros, having a measurement accuracy of 50 ppm or less (better).
• 7B103 "Production facilities" and "production equipment" as follows:
• 7D Software
• 7D001 "Software" specially designed or modified for the "development" or "production" of equipment specified in 7A or 7B.
• 7D002 "Source code" for the operation or maintenance of any inertial navigation equipment, including inertial equipment not specified in 7A003 or 7A004, or Attitude…
• 7D003 Other "software" as follows:
• 7D004 "Source code" incorporating "development" "technology" specified in 7E004.a.2., 7E004.a.3., 7E004.a.5., 7E004.a.6. or 7E004.b., for any of the following:
• 7D005 "Software" specially designed to decrypt "satellite navigation system" ranging code designed for government use.
• 7D101 "Software" specially designed or modified for the "use" of equipment specified in 7A001 to 7A006, 7A101 to 7A106, 7A115, 7A116.a., 7A116.b., 7B001, 7B002…
• 7D102 Integration "software" as follows:
• 7D103 "Software" specially designed for modelling or simulation of the "guidance sets" specified in 7A117 or for their design integration with the space launch…
• 7D104 "Software" specially designed or modified for the operation or maintenance of "guidance sets" specified in 7A117.
• 7E Technology
• 7E001 "Technology" according to the General Technology Note for the "development" of equipment or "software", specified in 7A, 7B, 7D001, 7D002, 7D003, 7D005 and…
• 7E002 "Technology" according to the General Technology Note for the "production" of equipment specified in 7A or 7B.
• 7E003 "Technology" according to the General Technology Note for the repair, refurbishing or overhaul of equipment specified in 7A001 to 7A004.
• 7E004 Other "technology" as follows:
• 7E101 "Technology" according to the General Technology Note for the "use" of equipment specified in 7A001 to 7A006, 7A101 to 7A106, 7A115 to 7A117, 7B001, 7B002…
• 7E102 "Technology" for protection of avionics and electrical subsystems against electromagnetic pulse (EMP) and electromagnetic interference (EMI) hazards, from…
• 7E104 "Technology" for the integration of the flight control, guidance, and propulsion data into a flight management system for optimisation of rocket system…
• 8 Marine
• 8A Systems, equipment and components
• 8A001 Submersible vehicles and surface vessels, as follows:
• 8A002 Marine systems, equipment and components, as follows:
• 8B Test, inspection and production equipment
• 8B001 Water tunnels designed to have a background noise of less than 100 dB (reference 1 μPa, 1 Hz) within the frequency range exceeding 0 Hz but not exceeding 500…
• 8C Materials
• 8C001 'Syntactic foam' designed for underwater use and having all of the following:
• 8D Software
• 8D001 "Software" specially designed or modified for the "development", "production" or "use" of equipment or materials, specified in 8A, 8B or 8C.
• 8D002 Specific "software" specially designed or modified for the "development", "production", repair, overhaul or refurbishing (re-machining) of propellers specially…
• 8E Technology
• 8E001 "Technology" according to the General Technology Note for the "development" or "production" of equipment or materials, specified in 8A, 8B or 8C.
• 8E002 Other "technology" as follows:
• 9 Aerospace and propulsion
• 9A Systems, equipment and components
• 9A001 Aero gas turbine engines having any of the following:
• 9A002 'Marine gas turbine engines' designed to use liquid fuel and having all of the following, and specially designed assemblies and components therefor:
• 9A003 Specially designed assemblies or components, incorporating any of the "technologies" specified in 9E003.a., 9E003.h. 9E003.i., or 9E003.k, for any of the…
• 9A004 Space launch vehicles, "spacecraft", "spacecraft buses", "spacecraft mission equipment", "spacecraft" on-board systems or equipment, terrestrial equipment…
• 9A005 Liquid rocket propulsion systems containing any of the systems or components, specified in 9A006.
• 9A006 Systems and components, specially designed for liquid rocket propulsion systems, as follows:
• 9A007 Solid rocket propulsion systems having any of the following:
• 9A008 Components specially designed for solid rocket propulsion systems, as follows:
• 9A009 Hybrid rocket propulsion systems having any of the following:
• 9A010 Specially designed components, systems and structures, for launch vehicles, launch vehicle propulsion systems or "spacecraft", as follows:
• 9A011 Ramjet, scramjet or 'combined cycle engines', and specially designed components therefor.
• 9A012 "Unmanned aerial vehicles" ("UAVs"), unmanned "airships", related equipment and components, as follows:
• 9A101 Turbojet and turbofan engines, other than those specified in 9A001, as follows;
• 9A102 'Turboprop engine systems' specially designed for unmanned aerial vehicles specified in 9A012 or 9A112.a., and specially designed components therefor, having a…
• 9A104 Sounding rockets, capable of a range of at least 300 km.
• 9A105 Liquid propellant rocket engines or gel propellant rocket motors, as follows:
• 9A106 Systems or components, other than those specified in 9A006 as follows, specially designed for liquid rocket propulsion or gel propellant rocket systems:
• 9A107 Solid propellant rocket motors, usable in complete rocket systems or unmanned aerial vehicles, capable of a range of 300 km, other than those specified in…
• 9A108 Components, other than those specified in 9A008, as follows, specially designed for solid and hybrid rocket propulsion systems:
• 9A109 Hybrid rocket motors and specially designed components as follows:
• 9A110 Composite structures, laminates and manufactures thereof, other than those specified in 9A010, specially designed for use in 'missiles' or the subsystems…
• 9A111 Pulse jet or detonation engines, usable in "missiles" or unmanned aerial vehicles specified in 9A012 or 9A112.a., and specially designed components therefor.
• 9A112 "Unmanned aerial vehicles" ("UAVs"), other than those specified in 9A012, as follows:
• 9A115 Launch support equipment as follows:
• 9A116 Reentry vehicles, usable in "missiles", and equipment designed or modified therefor, as follows:
• 9A117 Staging mechanisms, separation mechanisms, and interstages, usable in "missiles".
• 9A118 Devices to regulate combustion usable in engines, which are usable in "missiles" or unmanned aerial vehicles specified in 9A012 or 9A112.a., specified in 9A011…
• 9A119 Individual rocket stages, usable in complete rocket systems or unmanned aerial vehicles, capable of a range of 300 km, other than those specified in 9A005…
• 9A120 Liquid or gel propellant tanks, other than those specified in 9A006, specially designed for propellants specified in 1C111 or 'other liquid or gel propellants'…
• 9A121 Umbilical and interstage electrical connectors specially designed for "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in…
• 9A350 Spraying or fogging systems, specially designed or modified for fitting to aircraft, "lighter-than-air vehicles" or unmanned aerial vehicles, and specially…
• 9B Test, inspection and production equipment
• 9B001 Manufacturing equipment, tooling or fixtures, as follows:
• 9B002 On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, having all of the following:
• 9B003 Equipment specially designed for the "production" or test of gas turbine engine brush seals designed to operate at tip speeds exceeding 335 m/s and…
• 9B004 Tools, dies or fixtures, for the solid-state joining of "superalloy", titanium or intermetallic aerofoil-to-disk combinations described in 9E003.a.3. or…
• 9B005 On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, specially designed for use…
• 9B006 Acoustic vibration test equipment capable of producing sound pressure levels of 160 dB or more (referenced to 20 μPa) with a rated output of 4 kW or more at a…
• 9B007 Equipment specially designed for inspecting the integrity of rocket motors and using Non-Destructive Test (NDT) techniques other than planar x-ray or basic…
• 9B008 Direct measurement wall skin friction transducers specially designed to operate at a test flow total (stagnation) temperature exceeding 833 K (560 °C).
• 9B009 Tooling specially designed for producing gas turbine engine powder metallurgy rotor components having all of the following:
• 9B010 Equipment specially designed for the "production" of items specified in 9A012.
• 9B105 Aerodynamic test facilities for speeds of Mach 0,9 or more, usable for 'missiles' and their subsystems.
• 9B106 Environmental chambers and anechoic chambers, as follows:
• 9B107 Aerothermodynamic test facilities, usable for 'missiles', 'missile' rocket propulsion systems, and reentry vehicles and equipment specified in 9A116, having…
• 9B115 Specially designed "production equipment" for the systems, sub-systems and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A105 to 9A109, 9A111…
• 9B116 Specially designed "production facilities" for the space launch vehicles specified in 9A004, or systems, sub-systems, and components specified in 9A005 to…
• 9B117 Test benches or test stands for solid or liquid propellant rockets or rocket motors, having either of the following characteristics:
• 9C Materials
• 9C108 Insulation material in bulk form and "interior lining", other than those specified in 9A008, for rocket motor cases usable in "missiles" or specially designed…
• 9C110 Resin impregnated fibre prepregs and metal coated fibre preforms therefor, for composite structures, laminates and manufactures specified in 9A110, made either…
• 9D Software
• 9D001 "Software", not specified in 9D003 or 9D004, specially designed or modified for the "development" of equipment or "technology", specified in 9A001 to 9A119, 9B…
• 9D002 "Software", not specified in 9D003 or 9D004, specially designed or modified for the "production" of equipment specified in 9A001 to 9A119 or 9B.
• 9D003 "Software" incorporating "technology" specified in 9E003.h. and used in "FADEC Systems" for systems specified in 9A or equipment specified in 9B.
• 9D004 Other "software" as follows:
• 9D005 "Software" specially designed or modified for the operation of items specified in 9A004.e. or 9A004.f.
• 9D101 "Software" specially designed or modified for the "use" of goods specified in 9B105, 9B106, 9B107, 9B116 or 9B117.
• 9D103 "Software" specially designed for modelling, simulation or design integration of the space launch vehicles specified in 9A004, sounding rockets specified in…
• 9D104 "Software" as follows:
• 9D105 "Software" specially designed or modified to coordinate the function of more than one subsystem, other than that specified in 9D004.e., in space launch…
• 9E Technology
• 9E001 "Technology" according to the General Technology Note for the "development" of equipment or "software", specified in 9A004 to 9A012, 9A350, 9B or 9D.
• 9E002 "Technology" according to the General Technology Note for the "production" of equipment specified in 9A004 to 9A011, 9A350 or 9B.
• 9E003 Other "technology" as follows:
• 9E101 “Technology” as follows:
• 9E102 "Technology" according to the General Technology Note for the "use" of space launch vehicles specified in 9A004, goods specified in 9A005 to 9A011, 'UAV's…

The Vietnamese version of the EU list is machine translated and under review; for accuracy, refer to the official English text on EUR-Lex.