- List
- Wassenaar Arrangement – List of Dual-Use Goods and Technologies – WA-LIST (25) 1
Entries in this group
- 3.A. Systems, Equipment and Components
- 3.A.1. Electronic items as follows:
- 3.A.2. General purpose "electronic assemblies", modules and equipment, as follows:
- 3.A.3. Spray cooling thermal management systems employing closed loop fluid handling and reconditioning equipment in a sealed enclosure where a dielectric fluid is…
- 3.B. Test, Inspection and Production Equipment
- 3.B.1. Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
- 3.B.2. Test equipment specially designed for testing finished or unfinished semiconductor devices as follows and specially designed components and accessories…
- 3.C. Materials
- 3.C.1. Hetero-epitaxial materials consisting of a "substrate" having stacked epitaxially grown multiple layers of any of the following:
- 3.C.2. Resist materials as follows and "substrates" coated with the following resists:
- 3.C.3. Organo-inorganic compounds as follows:
- 3.C.4. Hydrides of phosphorus, arsenic or antimony, having a purity greater (better) than 99.999%, even diluted in inert gases or hydrogen.
- 3.C.5. High resistivity materials as follows:
- 3.C.6. Materials, not specified in 3.C.1., consisting of a "substrate" specified in 3.C.5. with at least one epitaxial layer of silicon carbide, gallium nitride…
- 3.D. Software
- 3.D.1. "Software" specially designed for the "development" or "production" of equipment specified in 3.A.1.b. to 3.A.2.h. or 3.B.
- 3.D.2. "Software" specially designed for the "use" of equipment specified in 3.B.1.a. to 3.B.1.f. or 3.B.2.
- 3.D.3. 'Computational lithography' "software" specially designed for the "development" of patterns on EUV-lithography masks or reticles.
- 3.D.4. "Software" specially designed for the "development" of equipment specified in 3.A.3.
- 3.D.5. "Software" specially designed to restore normal operation of a microcomputer, "microprocessor microcircuit" or "microcomputer microcircuit" within 1 ms after…
- 3.D.6. 'Electronic Computer-Aided Design' ('ECAD') "software" specially designed for the "development" of integrated circuits having any "Gate-All-Around Field-Effect…
- 3.E. Technology
- 3.E.1. "Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 3.A.1., 3.A.2., 3.B. or 3.C.
- 3.E.2. "Technology" according to the General Technology Note other than that specified in 3.E.1. for the "development" or "production" of a "microprocessor…
- 3.E.3. Other "technology" for the "development" or "production" of the following:
- 3.E.4. "Technology" "required" for the slicing, grinding and polishing of 300 mm diameter silicon wafers to achieve a 'Site Front least sQuares Range' ('SFQR') less…