Chủ nhật, 01/11/2026
Logo Cơ quan thường trực 81 (SOVNPA 81) Cơ quan đầu mối quốc gia Việt Nam
về phòng, chống phổ biến vũ khí hủy diệt hàng loạt
Cơ quan thường trực 81

3.E.4."Công nghệ" "cần thiết" cho việc cắt lát, mài và đánh bóng tấm wafer silic đường kính 300 mm để đạt 'dải bình phương tối thiểu mặt trước theo vị trí' ('SFQR') bằng hoặc nhỏ hơn 20 nm tại bất kỳ vị trí 26 mm × 8 mm nào trên mặt trước của tấm wafer và vùng loại trừ mép bằng hoặc nhỏ hơn 2 mm.

Danh mục
Wassenaar – Danh mục hàng hóa và công nghệ lưỡng dụng – WA-LIST (25) 1
Mục tương ứng của EU
3E004
Chú thích kỹ thuật:
Trong phạm vi 3E004, 'SFQR' là khoảng giữa độ lệch lớn nhất và độ lệch nhỏ nhất so với mặt phẳng chuẩn phía trước, được tính bằng phương pháp bình phương tối thiểu với toàn bộ dữ liệu bề mặt trước, bao gồm cả biên của vị trí, trong phạm vi một vị trí.
Nguyên văn tiếng Anh
Technical Note
For the purposes of 3.E.4., 'SFQR' is the range of maximum deviation and minimum deviation from front reference plane, calculated by least square method with all front surface data including site boundary within a site.
4. COMPUTERS
Note 1 Computers, related equipment and "software" performing telecommunications or "local area network" functions must also be evaluated against the performance characteristics of Category 5 – Part 1 (Telecommunications).
Note 2 Control units which directly interconnect the buses or channels of central processing units, 'main storage' or disk controllers are not regarded as telecommunications equipment described in Category 5 – Part 1 (Telecommunications).
N.B. For the status of "software" specially designed for packet switching, see Category 5.D.1. (Telecommunications).
Technical Note
For the purposes of Note 2, 'main storage' is the primary storage for data or instructions for rapid access by a central processing unit. It consists of the internal storage of a "digital computer" and any hierarchical extension thereto, such as cache storage or non-sequentially accessed extended storage.
Note 3 Not used since 2015