- List
- Wassenaar Arrangement – List of Dual-Use Goods and Technologies – WA-LIST (25) 1
Entries in this group
- 9.A. Systems, Equipment and Components
- 9.A.1. Aero gas turbine engines having any of the following:
- 9.A.2. 'Marine gas turbine engines' designed to use liquid fuel and having all of the following, and specially designed assemblies and components therefor:
- 9.A.3. Specially designed assemblies or components, incorporating any of the "technologies" specified in 9.E.3.a., 9.E.3.h., 9.E.3.i. or 9.E.3.k., for any of the…
- 9.A.4. Space launch vehicles, "spacecraft", "spacecraft buses", "spacecraft mission equipment", "spacecraft" on-board systems or equipment, terrestrial equipment…
- 9.A.5. Liquid rocket propulsion systems containing any of the systems or components, specified in 9.A.6.
- 9.A.6. Systems and components, specially designed for liquid rocket propulsion systems, as follows:
- 9.A.7. Solid rocket propulsion systems having any of the following:
- 9.A.8. Components specially designed for solid rocket propulsion systems, as follows:
- 9.A.9. Hybrid rocket propulsion systems having any of the following:
- 9.A.10. Specially designed components, systems and structures, for launch vehicles, launch vehicle propulsion systems or "spacecraft", as follows:
- 9.A.11. Ramjet, scramjet or 'combined cycle engines', and specially designed components therefor.
- 9.A.12. "Unmanned Aerial Vehicles" ("UAVs"), unmanned "airships", related equipment and components, as follows:
- 9.B. Test, Inspection and Production Equipment
- 9.B.1. Manufacturing equipment, tooling or fixtures, as follows:
- 9.B.2. On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, having all of the following:
- 9.B.3. Equipment specially designed for the "production" or test of gas turbine engine brush seals designed to operate at tip speeds exceeding 335 m/s and…
- 9.B.4. Tools, dies or fixtures, for the solid-state joining of "superalloy", titanium or intermetallic aerofoil-to-disk combinations described in 9.E.3.a.3. or…
- 9.B.5. On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, specially designed for use…
- 9.B.6. Acoustic vibration test equipment capable of producing sound pressure levels of 160 dB or more (referenced to 20 Pa) with a rated output of 4 kW or more at a…
- 9.B.7. Equipment specially designed for inspecting the integrity of rocket motors and using Non-Destructive Test (NDT) techniques other than planar x-ray or basic…
- 9.B.8. Direct measurement wall skin friction transducers specially designed to operate at a test flow total (stagnation) temperature exceeding 833 K (560°C).
- 9.B.9. Tooling specially designed for producing gas turbine engine powder metallurgy rotor components having all of the following:
- 9.B.10. Equipment specially designed for the "production" of items specified in 9.A.12.
- 9.D. Software
- 9.D.1. "Software", not specified in 9.D.3. or 9.D.4., specially designed or modified for the "development" of equipment or "technology", specified in 9.A., 9.B. or…
- 9.D.2. "Software", not specified in 9.D.3. or 9.D.4., specially designed or modified for the "production" of equipment specified in 9.A. or 9.B.
- 9.D.3. "Software" incorporating "technology" specified in 9.E.3.h. and used in Full Authority Digital Engine Control "(FADEC) Systems" for systems specified in 9.A…
- 9.D.4. Other "software" as follows:
- 9.D.5. "Software" specially designed or modified for the operation of items specified in 9.A.4.e. or 9.A.4.f.
- 9.E. Technology
- 9.E.1. "Technology" according to the General Technology Note for the "development" of equipment or "software", specified in 9.A.4. to 9.A.12., 9.B. or 9.D.
- 9.E.2. "Technology" according to the General Technology Note for the "production" of equipment specified in 9.A.4. to 9.A.11. or 9.B.
- 9.E.3. Other "technology" as follows: